Hey, I want to dip my feet into self-hosting, but i find the hardware side of things very daunting. I want to self host a Minecraft server (shocking, i know), and i’ve actually done this before both on my own PC and through server hosts. I’d like to run a Plex server as well (Jellyfin is champ now it sounds like? So maybe that instead), but I imagine the Minecraft server is going to be the much more intensive side of things, so if it can handle that, plex/jellyfin will be no issue.
The issue is, I can’t seem to find good resources on the hardware side of building a server. I’m finding it very difficult to “map out” what I need, I don’t want to skimp out and end up with something much less powerful than what I need, but i also don’t want to spend thousands of dollars on something extremely overkill. I looked through the sidebar, but it seems to mostly cover the software side of things. Are there any good resources on this?
Buy yourself a new gaming rig, and use your old gaming rig as a server. That’s what I usually do.
Or, see if you can get an old office PC for a couple hundred bucks on eBay. Anything that’s around 5 years old (10 is pushing it) and has decent specs (maybe an i7 and 16GB of RAM) should work fine as a Minecraft and Plex server. Then you can get a cheap (ideally less than $200) graphics card and be good to go.
Bottom line, a “server” is just a PC that’s serving things. You don’t need enterprise grade hardware. If you’re new to hosting, I’d advise you to start cheap and then upgrade to better hardware in a few years when you KNOW what you need. No need to get something really nice and expensive right now.
Buy yourself a new gaming rig, and use your old gaming rig as a server. That’s what I usually do.
Seconded. A few years ago I upgraded my CPU, which also required me to swap the motherboard and RAM. The old Mobo / CPU / RAM combo was sitting around in my closet. I just bought a decent case, power supply, and a few hard drives, and bam. Instant server.
As far as graphics card, I would go with something cheaper unless you have a specific reason. If your CPU has a built in graphics processor, that’s probably good enough. My CPU didn’t, so I had to throw a $30 card in.
Hardware wise, you just need a good PC. One thing to note is that graphics are almost irrelevant for servers. In your case, it would help to have AV1 encoding, so you could go with a $110 Intel A380 or A310.
The most important thing is RAM. The more server applications you start putting on there, the more RAM you’ll need. 16GB is fine for what you need right now, but make sure your mobo has two extra slots so you can up it to 32 if needed.
Storage, it’s really up to you. If you want everything on an NVMe, great! If you want everything in a RAID array, expensive, but great! Using mdadm for RAID arrays is fairly easy, just a lot of reading. Make sure you have enough SATA ports to support all the disks you need if you want that.
CPU, avoid ones with integrated graphics to save cost. Unless you’re buying one that does AV1 encoding, then you don’t need the A380.
You don’t need to buy server hardware, although it is nice. Depending on where you live you might be able to buy some decent second hand server hardware.
If it was me, I would buy new desktop hardware. Here is a fairly decent server that will do almost anything: Go for around 16 or 24 core CPU with high Ghz per core. 64GB or 128GB DDR5 RAM. Your most important factor will be storage speed. Go with NVMe drives. You have some choices here. JBOD: One or more independent M.2 key drives. Software RAID: Use your CPU to manage the RAID configuration. Hardware RAID: Use a RAID controller HBA card to manage the RAID (faster but single point of failure). Use RAID 1 for data protection (can lose one drive and still have all your data), RAID 0 (double the speed of your drives), RAID 10 (best of both but needs double the drives). Choose a motherboard that suits your choices.
Things to take into account: If you go with a RAID controller card, make sure that the PCIe lanes it uses can take the full speed of your RAID configuration or you might be bottlenecked there. Choosing an Intel or AMD CPU doesn’t make much difference. If you are not good with linux distros and don’t want a learning curve, stick with something like Ubuntu LTS 22.04 server. You most likely won’t need any graphics card, but it depends what you want to do.
You can run a minecraft server on an old laptop, so these specs might be overkill, I just put what I would get and it will do almost anything you want to do with it. An 8 core CPU, 16GB RAM, with 1 NVMe drive will also be capable of all your described needs just fine.
Don’t get server hardware, use regular desktop/laptop machines as they’ll be more than enough for you. Server hardware is way more expensive and won’t be of any advantage. If you’re looking to buy you can even get very good 9-10th gen Intel CPUs and motherboards that are perfect to run servers (very high performance) but that people don’t want because they aren’t good to play the latest games. This hardware is also way more power efficient and sometimes even more powerful than any server hardware that you might get for the same price. Get this hardware for cheap and enjoy.
I’ve gone with Unraid and consumer level hardware (intel i3 12100 and 16gb of standard ddr4 ram) the only “server hardware” I have, is an LSI HBA card that’s in IT mode so I can connect more HDDs.
I’m even used SMR drives in my array, just use a good CMR drive for parity and the biggest SSD you can get for your cache drive and you will be good to go.
1ct KAMRUI Mini PC Intel N5105 Windows 11 Pro 8GB RAM 256GB SSD WIFI6 4K Dual LAN (proxmox arbiter and also this will run your pfsense/opensense firewall vm/appliance)
2ct UM350 Mini PC 16 GB RAM 512 GB PCIe SSD AMD Ryzen 5 3550H Mini Computers (both of these will be the prox 2 and prox3 worker nodes)
All of that together with the Buy it now options are around $1000 USD total with shipping. That Buffalo NAS will need 3.5" drives. So add that to the cost.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
removed by mod
Same for me
Buy yourself a new gaming rig, and use your old gaming rig as a server. That’s what I usually do.
Or, see if you can get an old office PC for a couple hundred bucks on eBay. Anything that’s around 5 years old (10 is pushing it) and has decent specs (maybe an i7 and 16GB of RAM) should work fine as a Minecraft and Plex server. Then you can get a cheap (ideally less than $200) graphics card and be good to go.
Bottom line, a “server” is just a PC that’s serving things. You don’t need enterprise grade hardware. If you’re new to hosting, I’d advise you to start cheap and then upgrade to better hardware in a few years when you KNOW what you need. No need to get something really nice and expensive right now.
Seconded. A few years ago I upgraded my CPU, which also required me to swap the motherboard and RAM. The old Mobo / CPU / RAM combo was sitting around in my closet. I just bought a decent case, power supply, and a few hard drives, and bam. Instant server.
As far as graphics card, I would go with something cheaper unless you have a specific reason. If your CPU has a built in graphics processor, that’s probably good enough. My CPU didn’t, so I had to throw a $30 card in.
just get a synology?
To run Minecraft and Plex? That’s not really the ideal use case for a Synology…
Way too expensive, and not what they need.
Hardware wise, you just need a good PC. One thing to note is that graphics are almost irrelevant for servers. In your case, it would help to have AV1 encoding, so you could go with a $110 Intel A380 or A310.
The most important thing is RAM. The more server applications you start putting on there, the more RAM you’ll need. 16GB is fine for what you need right now, but make sure your mobo has two extra slots so you can up it to 32 if needed.
Storage, it’s really up to you. If you want everything on an NVMe, great! If you want everything in a RAID array, expensive, but great! Using mdadm for RAID arrays is fairly easy, just a lot of reading. Make sure you have enough SATA ports to support all the disks you need if you want that.
CPU, avoid ones with integrated graphics to save cost. Unless you’re buying one that does AV1 encoding, then you don’t need the A380.
deleted by creator
You don’t need to buy server hardware, although it is nice. Depending on where you live you might be able to buy some decent second hand server hardware.
If it was me, I would buy new desktop hardware. Here is a fairly decent server that will do almost anything: Go for around 16 or 24 core CPU with high Ghz per core. 64GB or 128GB DDR5 RAM. Your most important factor will be storage speed. Go with NVMe drives. You have some choices here. JBOD: One or more independent M.2 key drives. Software RAID: Use your CPU to manage the RAID configuration. Hardware RAID: Use a RAID controller HBA card to manage the RAID (faster but single point of failure). Use RAID 1 for data protection (can lose one drive and still have all your data), RAID 0 (double the speed of your drives), RAID 10 (best of both but needs double the drives). Choose a motherboard that suits your choices.
Things to take into account: If you go with a RAID controller card, make sure that the PCIe lanes it uses can take the full speed of your RAID configuration or you might be bottlenecked there. Choosing an Intel or AMD CPU doesn’t make much difference. If you are not good with linux distros and don’t want a learning curve, stick with something like Ubuntu LTS 22.04 server. You most likely won’t need any graphics card, but it depends what you want to do.
You can run a minecraft server on an old laptop, so these specs might be overkill, I just put what I would get and it will do almost anything you want to do with it. An 8 core CPU, 16GB RAM, with 1 NVMe drive will also be capable of all your described needs just fine.
Don’t get server hardware, use regular desktop/laptop machines as they’ll be more than enough for you. Server hardware is way more expensive and won’t be of any advantage. If you’re looking to buy you can even get very good 9-10th gen Intel CPUs and motherboards that are perfect to run servers (very high performance) but that people don’t want because they aren’t good to play the latest games. This hardware is also way more power efficient and sometimes even more powerful than any server hardware that you might get for the same price. Get this hardware for cheap and enjoy.
I’ve gone with Unraid and consumer level hardware (intel i3 12100 and 16gb of standard ddr4 ram) the only “server hardware” I have, is an LSI HBA card that’s in IT mode so I can connect more HDDs.
I’m even used SMR drives in my array, just use a good CMR drive for parity and the biggest SSD you can get for your cache drive and you will be good to go.
1ct KAMRUI Mini PC Intel N5105 Windows 11 Pro 8GB RAM 256GB SSD WIFI6 4K Dual LAN (proxmox arbiter and also this will run your pfsense/opensense firewall vm/appliance)
2ct UM350 Mini PC 16 GB RAM 512 GB PCIe SSD AMD Ryzen 5 3550H Mini Computers (both of these will be the prox 2 and prox3 worker nodes)
Buffalo TS5410DN1604 TeraStation (NAS)
1ct Cisco Catalyst WS-C3650-24PS-S 24-Port Gigabit Ethernet Switch TESTED
All of that together with the Buy it now options are around $1000 USD total with shipping. That Buffalo NAS will need 3.5" drives. So add that to the cost.
That is a complete overkill. You don’t need a cluster of Proxmox nodes for personal hosting. And you certainly don’t need a 24-port switch.
So my 3 r720xds in a proxmox cluster with CEPH would definitely be too much then
Decent older servers (e.g., Dell Poweredge) can be had off of Craigslist/FB Marketplace pretty cheaply (~$300-$400).