You probably need to reset the configuration on the controllers. I’m not familiar with that particular unit but older ones had serial ports that you could plug in a cable to and would either have a firmware prompt for commands or a menu system that you could interact with to do things like clear errors or reset the configuration.
Factory reset and start from scratch. No telling what state that controller or network settings are in. Docs online seem to still be available. The amber light could be network connectivity, as I’m sure that thing has a static IP already set.
After doing some more digging, I’ve found it’s apparently possible to use MD1200 controllers in place of the MD3600x FC controllers, which I have no intention of taking full advantage of the fiber part since I’m really only looking at doing a single host config.
Now it’s more a matter of making sure it actually will work, and the getting the proper HBA/SAS controller (I don’t really know the difference)
Using the SAS cards instead of the FC controllers should be fine, but it will be a different beast. The MD3600 controllers are basically your RAID card and you use a SAS HBA to connect to it. The virtual disks are configured on the MD3600 and exposed as LUNs to the hosts over FC. If you put plain SAS controllers in the storage chassis instead, you are exposing all the bare drives to the host. That is how I would do it if I were in your shoes and then would just create ZFS arrays over those bare disks. If I were going to try and have multiple hosts using that storage then you would need to stick with the MD3600F.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
You probably need to reset the configuration on the controllers. I’m not familiar with that particular unit but older ones had serial ports that you could plug in a cable to and would either have a firmware prompt for commands or a menu system that you could interact with to do things like clear errors or reset the configuration.
Factory reset and start from scratch. No telling what state that controller or network settings are in. Docs online seem to still be available. The amber light could be network connectivity, as I’m sure that thing has a static IP already set.
After doing some more digging, I’ve found it’s apparently possible to use MD1200 controllers in place of the MD3600x FC controllers, which I have no intention of taking full advantage of the fiber part since I’m really only looking at doing a single host config.
Now it’s more a matter of making sure it actually will work, and the getting the proper HBA/SAS controller (I don’t really know the difference)
Edit: Links to what I believe I’m referring to
Using the SAS cards instead of the FC controllers should be fine, but it will be a different beast. The MD3600 controllers are basically your RAID card and you use a SAS HBA to connect to it. The virtual disks are configured on the MD3600 and exposed as LUNs to the hosts over FC. If you put plain SAS controllers in the storage chassis instead, you are exposing all the bare drives to the host. That is how I would do it if I were in your shoes and then would just create ZFS arrays over those bare disks. If I were going to try and have multiple hosts using that storage then you would need to stick with the MD3600F.